Sierra Housewares S5012 - Manual (Page 12)

2
User Codes
8
How to Assign or Change User Codes
To Assign or Change
a User Code:
1. Press and hold the
[user prg] key for 2 seconds
until you hear two beeps.
You see:
ENTER MASTER
USER CODE
2. Enter the master user code.
You see:
ENTER
USER NUMBER ##
If a user number is available,
the number is displayed.
3. Enter the two-digit user num-
ber . You see:
USER ## = ####
NEW CODE =
4. Enter the new four-digit user
code. You see:
ENGLISH?
Byp=NO Home=YES
(continued)
User codes can be created or
changed as often as you like.
Any code you select must be
four digits long.
You cannot use 0000, or assign
the same user code to more
than one user number. Avoid
codes that are easy to guess,
like 1234. The default master
user code (user number 1) is
5832. For security reasons, be
sure to change this code. Do
not assign the code 5832 to an-
other user.
If you make a mistake while
assigning a user code, you may
correct it by repeating the pro-
cedure.
Be sure to record the user
codes, and to keep these
records in a safe place.