Sierra Housewares S5012 - Manual (Page 62)

Areas
7
58
Using the Zone Status Menu
How To Use the
Zone Status Menu:
1. From the Area Status Menu,
press and hold the
[quick view] key for 2 seconds
until you hear two beeps.
Then, press the area number.
You see something like this:
.F.F.B■■■■■■■■■■
■■■■■■■■■■■■■■
The display identifies each
zone's status, using the abbre-
viations to the left. Zones out-
side of the area are blacked out.
2. To bypass a faulted zone,
press the key fol-
lowed by the two-digit zone
number.
3. To remove the bypass on a
zone, press the key
followed by the zone number.
4. To exit, press the
key twice.
The Zone Status Menu tells you
if the zones of an areas are nor-
mal, faulted or bypassed. De-
pending on your system's pro-
gramming, you may only be
able to view the Zone Status
Menu for those areas to which
you have rights.
The Zone Status Menu uses the
following abbreviations to sum-
marize a zone's status:
. = Normal. The zone is
ready to be armed.
B = Bypassed. The zone
was bypassed.
F = Faulted. The zone's sen-
sor is faulted.