Sierra Housewares S5012 - Manual (Page 57)

53
Areas
7
Understanding the Area Status Menu
The Area Status Menu summarizes the conditions of your system's
areas. The menu only appears on keypads assigned to the com-
mon area of a partitioned system. To display the menu, enter
your user code. You see something like this:
AREA 12345678
STATUS RNAHIRAH
The numbers on the right-hand side of the display represent the
areas of your system. The letter under the number indicates the
status of the area. If you do not have rights to all of the areas in
your system, your keypad may be programmed to blacken a por-
tion of the menu's display (see below).
The table on the following page explains the abbreviations used
in the Area Status menu. Thus, in the example above, area 1 is
ready to be armed, while area 3 is armed.
To get more information about any given area, press and hold the
[quick view] key for two seconds until you hear two beeps.
Then, press the area number. This takes you to the Quick View
display, described later in this section. To exit this menu, press
the
key. If you do not press any keys, the keypad auto-
matically exits the Area Status Menu.
AREA 12345678
STATUS RNAHIRAH
AREA 12345678
STATUS RNAH■■■
If you do not have rights to all
of the areas of your system,
your keypad may be pro-
grammed to blacken out por-
tions of the Area Status Menu,
as the lower example shows.