Sierra Housewares S5012 - Manual (Page 27)

3
Arm/ Bypass
23
Automatic (Timed)
Arming
Interior armed _X_
Perimeter armed _X_
Exit allowed _X_
Requires user code ___
Automatically arms _X_
No entry allowed ___
To Change Automatic-
Arming Days:
1. Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
Enter the master user code.
Then, press the key
five times until you see:
AUTO-ARM DAYS?
Byp=N0 Home=YES
2. Press the key. You
see something like this:
SMTWTFS 1234567
SMTWTFS
3. In this example, the boxes
show that arming occurs on
weekdays. Press the number
above the letter of the day(s)
you wish to switch on or off.
4. To exit, press the
key.
Your system can automatically
arm itself at preset times of the
day.
At two minutes and again at one
minute before the Automatic
Arming sequence begins, the
siren sounds twice. Then, the
exit delay begins. You must
leave the building during the
exit delay, or an alarm sounds.
You can postpone the Auto-
matic Arming sequence by one
hour. When the siren sounds
two minutes before arming oc-
curs, press the
key,
then enter your user code.
You can change the days that
Automatic Arming occurs by
following the procedure to the
right. To change the times that
arming occurs, contact your in-
staller.