Smart Technologies SMARTBoard 480iv - Manual (Page 16)

Choosing a height
SMART includes a mounting template with each interactive whiteboard system. If you lose this
template, contact your authorized SMART reseller ( smarttech.com/where ). Using this template
ensures that you can do the following:
l
Mount the projector at a safe height for head space clearance, while maintaining enough space
for airflow and installation access above the unit.
l
Position the projector at the correct height above your interactive whiteboard to align the
projected image with the touch screen.
Dimensions on the template recommend a distance from the floor suitable for adults of average
height. You should consider the general height of your user community when you choose a position
for your interactive whiteboard.
Securing the interactive whiteboard system
To learn how to secure the SMART V25 projector to the boom, see the included installation
instructions for the SMART Board 480iv and 680iv interactive whiteboard system
( smarttech.com/kb/153153 ).
Installing your audio system
Your SBA-V projection audio system comes with two SBA-V speakers and mounting brackets. Your
audio system also includes a switching power supply and the cabling required to connect your audio
system to your interactive whiteboard and projector.
Before you connect the audio system to the projector, you must install the speaker brackets,
speakers and speaker cable clips. Mount the speakers directly to your interactive whiteboard.
Connect the speakers to the projector connection panel using the dual-channel (left and right) RCA
plug-to-3.5 mm phone connector cable included with the speakers.
To learn how to install your audio system, see the installation instructions for the 20W audio system
for SMART Board interactive whiteboards ( smarttech.com/kb/158089 ).
C H A P T E R 2
Installing your interactive whiteboard system
6