Seiko FB 390 - Manual (Page 14)

9
Loading Cut Sheet Paper
1 Turn the printer on.
2 Set paper select lever toward the back of printer as shown in Figure 3-2.
Figure 3-2 Setting the paper select lever
3 Set the gap adjust lever for example to the position “1” for thin paper.
4 Position the left cut sheet guide by referring to the marking on the window cover.
The positions for A4 and Letter size paper are indicated on the left side of the
window cover as shown in Figure 3-3.
5 Please pull out the small Front table extension tabs if the size of paper is long
and requires extra support, as shown in Figure 3-4
Figure 3-4 Pull out the small front table extension tabs
6
Insert the paper as shown in Figure 3 - 5.
The paper is fed into the printer automatically and stops at the print start
Front table extension tabs
Figure 3-3 Adjusting the paper guide