Using tractor paper, Loading tractor paper – Seiko FB 390 User Manual
Page 15
10
position. You can set the printer to detect skew so if the paper skews during
loading, the printer detects it and automatically ejects the paper to the front
table.
7
After the above steps, the printer is ready to print.
Using Tractor Paper
This printer feeds tractor paper from the rear of the printer to the front.
Figure 3-6 Feeding direction of tractor paper
Loading Tractor Paper
1
Turn the printer on.
2
Set paper select lever toward the front of printer as shown in Figure 3-7.
NOTE
The printer’s skew detection level can be set within the
Setup Menu System. Be careful
with the lowest possible setting because the printer might reject the paper due to even
the smallest skew. If this happens, try a more medium setting.
In
Out
Figure 3-7 Setting the paper select lever
Figure 3-5 Loading cut sheet