Sony CHC-CL3 - Manual (Page 19)

Tape – Recording
19
Recording on a tape
manually
— Manual Recording
You can record just the portions you like from
a CD on a tape. You can also record a radio
program.
The recording level is automatically adjusted.
1
Load a blank tape.
2
Press FUNCTION repeatedly to select
the desired source to record.
3
Press REC PAUSE/START.
The tape deck stands by for recording.
When you want to record on the bottom
side, press TAPE nN.
4
Press PLAY MODE/DIRECTION
repeatedly until
g appears to record
on one side or h (or j ) to record on
both sides.
5
Press REC PAUSE/START and then
start playing the desired source to
record.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side.
Timer recording radio
programs
To timer record, you must first preset the radio
station (see “Presetting radio stations” on page
14) and set the clock (see “Setting the time” on
page 8).
1
Tune in the preset radio station (see
“Listening to the radio” on page 15).
2
Press CLOCK/TIMER SET on the
remote.
“DAILY SET ?” appears.
3
Turn ./> (or press . or > on
the remote) to select “REC SET ?”, then
press ENTER/YES on the remote.
“ON” appears and the hour indication
flashes.
4
Set the time to start recording.
Turn ./> (or press . or > on
the remote) to set the hour, then press
ENTER/YES on the remote.
The minute indication flashes.
Turn ./> (or press . or > on
the remote) to set the minute, then press
ENTER/YES on the remote.
5
Set the time to stop recording following
the procedure in step 4.
continued