Sony CHC-CL3 - Manual (Page 8)

8
Setting the time
1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
Proceed to step 5 when you set the clock for
the first time.
3
Turn ./> (or press . or > on
the remote) to select “CLOCK SET?”.
4
Press ENTER/YES.
5
Turn ./> (or press . or > on
the remote) to set the hour.
6
Press M (or ENTER/YES on the
remote).
The minute indication flashes.
7
Turn ./> (or press . or > on
the remote) to set the minute.
8
Press ENTER/YES on the remote.
The clock starts working.
If you made a mistake
Press m or M repeatedly until the incorrect
item flashes, then set it again.
To change the preset time
Start over from step 1.
Saving the power in
standby mode
Press DISPLAY repeatedly when the
system is off. Each time you press the
button, the system switches cyclically as
follows:
Demonstration t Clock display t Power
Saving Mode
To cancel the Power Saving Mode
Press DISPLAY once to show the
demonstration, twice to show the clock display.
Tip
?/1 indicator lights up even in the Power Saving
Mode.