Sony ICD-BP - Manual (Page 20)

20 GB
Recording Messages (continued)
Recording with an external microphone or from other
equipment
Connect a plug-in-power type microphone or other equipment to the MIC
(PLUG IN POWER) jack.
When you connect an external microphone, the built-in microphone is
automatically cut off. When a plug-in-power type microphone is
connected, power is automatically supplied to the microphone from the IC
recorder.
Remaining memory indication
During recording, the remaining memory indicator decreases one by one.
You can check the remaining recording time by changing to the remaining
time display mode (page 53).
If the “Memory Stick” contains files other than sound data, the amount of
those files is subtracted from the remaining memory amount. To check the
remaining recording time, use the menu to switch the display mode to the
remaining time. You can switch the display mode during recording.
When the remaining recording time reaches 5 minutes, the remaining
memory indication flashes. When the remaining time reaches 1 minute, the
remaining time indication will flash in the display window regardless of
the display mode (page 53). When the memory is full, recording
automatically stops and “NO MEMORY SPACE” will flash in the display
window with an alarm sound. To continue recording, first erase some of
the messages (page 25).
Remaining memory
indication
Remaining time
indication