Sony ICD-BP - Manual (Page 51)

Other Functions
51 GB
To cancel the alarm setting before the playback starts
Press xSTOP while the alarm sound is heard. You can stop even when the
HOLD function is activated.
Notes
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and the new message will be played back.
• If the alarm time comes during recording, the alarm will sound after the recording
is finished. “,” will flash when the alarm time comes.
• If more than one alarm time comes during recording, only the first message will
be played back.
• When the alarm time comes when the unit is in the menu mode, alarm will sound
and the menu mode will be cancelled.
• If you erase the message you set the alarm for, the alarm setting will be cancelled.
• If you add an index to the message you set the alarm for, alarm setting remains
on only the first part of the divided message.
• If you erase the index on the message you set the alarm for, the alarm setting of
the latter message will be cancelled.
• You can adjust the playback volume with VOL +/–.
• If the alarm time comes during erasing, the alarm will sound after the erasing is
finished.
• Alarm setting will not be cancelled when the alarm playback finishes. To cancel
alarm setting, see below.
To check the alarm setting
Follow steps 1 and 2 on page 48 after selecting the alarm setting. The alarm
date and time will be displayed in the display window.
To cancel the alarm setting or change the alarm time
1 Select the message you set the alarm for, and
press the jog lever toward MENU.
2 Press the jog lever up or down (>/.) to
select “ALARM“ and press the jog lever
(x•B).
The current alarm setting is displayed.
3 To cancel the alarm setting: Press the jog lever up or down (>/
.
) to select “OFF” and press the jog lever (x•B).
To change the alarm date and time: Press the jog lever (x•B).
When the alarm date is displayed, follow steps 3 to 5 on pages 49 and
50 to change the alarm date and time.
4 Press the jog lever toward MENU to exit the menu mode.