Sony ICD-BP - Manual (Page 41)

Editing Messages
41 GB
Adding Priority Mark(s) during Playback
1
Press A-B REPEAT/PRIORITY button for
more than 1 second during playback of
the message you want to mark.
“v” and “PRIORITY” will flash on the
display window while the first and last 5
seconds of the message is played back 10
times.
2
Press A-B REPEAT/PRIORITY repeatedly or press the jog lever
up or down (>/.) to select the number of priority
mark(s) (v).
3
Press the jog lever (x•B) to fix the setting.
The setting is finished and the messages will be renumbered.
Messages with priority mark(s)
Messages are sorted in order of the number of priority mark(s) (v) in a
folder. Messages without a priority mark are moved behind the messages
with priority mark(s).
1 Tip
If there are over 2 messages with the same number of priority marks in a folder,
these messages are sorted by the recorded date and time (The oldest one comes
first).
e.g. When there are 3 messages in a folder
Note
You can also add priority mark(s) using the supplied “Memory Stick Voice
Editor“ software. But messages are not sorted in order of the number of the
priority marks unless you sorted by the number of priority marks using the
software.
Message 1 Message 2 Message 3