Sony ICD-BP - Manual (Page 70)

70 GB
To IC recorder
USB connector
Connecting
cable (supplied)
To USB
connector of
your computer
Transferring the “Memory Stick” data
onto your computer
You can transfer the Memory Stick data onto your computer either by
connecting the IC recorder to the computer or inserting the Memory Stick
into the computer.
Connecting the IC Recorder to your Computer
Use the USB connecting cable supplied with the IC recorder to connect the
USB connectors of the IC recorder and your computer.
The IC recorder is recognized by the computer as soon as the cable is
connected. You can connect or disconnect the cable when the IC recorder
and the computer are turned on or off.
Notes
• Be sure to install the “Memory Stick Voice Editor” software before connecting
the IC recorder to your computer.
• Do not connect more than two USB devices to your computer. Normal
operation will not be guaranteed.
• Use of this IC recorder with a USB hub or a USB extension cable is not guaranteed.
• A malfunction may occur depending on the USB devices connected at any one
time.
• Before connecting the IC recorder to the computer, check the remaining
battery power of the IC recorder (more than one segment of the battery
indicator “
”should be on) . If the batteries are exhausted, communication
between the IC recorder and the computer may not succeed.
• When you connect the IC recorder to the computer, make sure that the IC
recorder is in the stop mode.
• We recommend you disconnect the cable from the computer when you do not
use the “Memory Stick Voice Editor”.