Stanton Mixer Control Surface/Audio Interface SCS.1m - Manual (Page 14)

11
3.2
Front Panel
In this panel, you will be able to connect your headphones. Stanton has included a headphone extender cable as
the headphone jack is recessed into the panel to prevent accidentally damaging the headphone jack. Stanton has
designed the headphone output to be extremely powerful and loud; it is important to remember that you must
control the level of this output in your host application or assign it to the headphone knob on the front panel for
volume control. ALWAYS have the headphone output turned down in your host application before using the
headphones and slowly bring the volume up to a comfortable level. (Figure 3.7)
WARNING: Never put your headphones on until you are 100% sure you have control over the output level. This is
good safe practice and something which should become second nature to you.
Figure 3.7