Stanton Mixer Control Surface/Audio Interface SCS.1m - Manual (Page 40)

37
To disable a device, right-click on it (e.g. on the Ethernet adapter) and choose Disable. The disabled device will be
marked with a red cross. (Figure A.4)
Figure A.4
Now, check the DPC Latency Checker to see if the excessive latency values (red bars) disappeared.
If yes, we have found the problem, if not, try the next device. To enable a device again, choose Enable from the
context menu.
After you have identified the device driver which is responsible for the dropouts, visit the device vendor's Web site
or contact its Customer Support department to find an update for this driver. If there is no update available at the
moment, you may decide to disable that particular device while you are using streaming applications.