Stanton Mixer Control Surface/Audio Interface SCS.1m - Manual (Page 49)

46
If you expand out the device subkey, you’ll find another subkey called Device Parameters. Click it to select it and
look in the right pane. (Figure A.19)
Figure A.19
In the example above, the SidSpeed key actually exists, but it is set to the incorrect speed. Double click on the
SidSpeed value and a window will open. In that window will be a field called Value Data. If that value is a 0 or 1,
CHANGE IT to a 3 and press OK. If you do not see the SidSpeed value at all, keep reading. (Figure A.20)
Figure A.20