Stanton Mixer Control Surface/Audio Interface SCS.1m - Manual (Page 33)

30
5.3 Using DaRouter
When using DaRouter, there are two basic types of presets that you may utilize; generic and application specific.
The generic preset allows you to configure the application to SCS.1m through conventional MIDI Learn. However,
the application specific presets are designed to work specifically with certain applications and provide logic in
SCS.1m that is focused towards that application.
5.4
Loading a Preset
Confirm that no preset is loaded and your SCS.1m is connected. At this point, you may select the preset you wish
to use and then read its included documentation by clicking the “?” button. Also, remember to check the Stanton
website for the latest presets as they are constantly being updated to support new functionality and applications!
5.5 Using a Preset for the First Time
1) Select the desired preset you would like to use depending on which application you are using DaRouter with.
2) Move any SCS.1m faders or knobs, to confirm feedback is making its way into DaRouter and the unit should
load the preset and stop flashing.
3) Now you are ready to use the preset.
Important Click the “?” button next to the preset (Figure 5.7) to read its included HTML documentation which
explains setting up the host application and the functionality of the SCS.1m with that particular preset.
Figure 5.7
For more information about SCS.1m, please visit
ww and check its related
links.