Sony PDW-F30 - Manual (Page 82)

82
System Menu
Cha
p
te
r 6
Me
nu
s
LOCAL ENABLE [> Local ENA]: Select the buttons that can
be operated on this unit even when the remote control
switch is set to REMOTE.
ALL DISABLE [>> All DIS]: The EJECT button and the
buttons in the recording/playback control block cannot be
operated.
* STOP & EJECT [>> STOP&EJ]: Only the STOP button and
EJECT button can be operated.
ALL ENABLE [>> All ENA]: The EJECT button and all of the
buttons in the recording/playback control block can be
operated. The preroll time can be set and time data can be
selected on this unit.
REC FORMAT [> REC format]: Select the recording format
(MPEG-2 compression rate).
HQ [>> HQ]: 35Mbps
*
SP [>> SP]: 25Mbps
LP [>> LP]: 18Mbps
DISC END [> Disc End]: Select what the unit should do when
the free disc capacity is exhausted during recording.
GOTO TOP [>> GOTO TOP]: Move to the top of the disc.
END STOP [>> END STOP]: Stop at the end of the disc.
*EJECT [>> EJECT]: Eject the disc automatically.
CLIP TITLE [> Clip Title]:
Specify how to assign clip
titles.
AUTO TITLE [>> AT Title]:
Select whether to assign
clip titles automatically.
* DISABLE [>>> DISABLE]: Do not assign.
ENABLE [>>> ENABLE]: Assign.
TITLE [>> Title]: Assign
arbitrary titles.
The CLIP AUTO TITLING screen appears.
For details, see “To assign clip titles” (page 56) in Chapter 4.
FILE NAMING [> File Name]:
Specify the clip and clip
list name format
NAMING FORM [>> Name
Form]: Specify the clip
and clip list name format
*C**** [>>> C****]: Standard format
free [>>> free]: Enable free format
AUTO NAMING[>> AT
Naming]: Specify the
format of the file names
generated when clips are
recorded
*C****: [>>> C****]: Standard format
title [>>> title]: Assign the same name as clip title
SYSTEM SEL [> System
Sel]: Select the system
frequency and area of
use.
Note
After changing any of the sub-
items, press the on/standby
switch to power the unit off
(put it into standby), and then
press it again to power the unit
on. The initial settings of the
setup menu as a whole will
change to reflect the settings
made here.
SYSTEM FREQ [>> Sys
Freq]: Select the system
frequency.
* 60I [>>> 60i]: 59.94i
50I [>>> 50i]: 50i
30P [>>> 30P]: 29.97P
25P [>>> 25P]: 25P
23.98P [>>> 23.98P]: 23.98P
UC/J [>> UC/J]: Select the
area of use.
UC [>>> UC]: For areas outside Japan
*
J [>>> J]: For Japan
23.9P OUTPUT [>> 23.9P
out]: Select the monitor
output when the
SYSTEM FREQ is
“23.98P”.
* 23.98PsF [>>> 23.9PsF]: Output as 23.98P.
2-3 PULL DOWN [>>> 2-3PD]: Output after pulldown
conversion to 59.94i.
SEARCH ENABLE [> Search ENA]: Specify how to put the
unit into a search mode (jog, shuttle, or variable-speed).
* DIAL DIRECT [>> DIAL]: The unit switches to a search mode
when you press the JOG, SHUTTLE, or VAR button, or
when you turn the jog or shuttle dial (except during
recording).
VIA SEARCH KEY [>> via KEY]: The unit switches to a
search mode when you press the JOG, SHUTTLE, or VAR
button.
VAR SPD LIMIT [> VAR limit]: Specify whether to limit the
speed of variable speed playback
*OFF [>> OFF]: –1 to +2 times normal speed
ON [>> ON]: 0 to +1 times normal speed
OPERATIONAL FUNCTION [Operational]: Operation
settings Description