Sony PDW-F30 - Manual (Page 85)

85
System Menu
C
h
ap
te
r 6
M
enu
s
VITC POS SEL-1 [> VITC pos-1]: Select a line to insert the
VITC in.
Note
You can insert the VITC signal in two places. To insert it in two
places, set both this item and VITC POS SEL-2.
When the system frequency is 60i, 23.98P or 30P
20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line
from 12 to 20.
Factory default setting: *16 LINE [>> 16 line]
Note
When the system frequency is 60i, 23.98P, or 30P, the VBID
(Video Blanking ID) receives priority over a selection of
“20LINE”.
When the system frequency is 50i or 25P
22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from
9 to 22.
Factory default setting: *19 LINE [>> 19 line] (line 19)
VITC POS SEL-2 [> VITC pos-2]: Select a line to insert the
VITC in.
Note
You can insert the VITC signal in two places. To insert it in two
places, set both this item and VITC POS SEL-1.
When the system frequency is 60i, 23.98P or 30P
20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line
from 12 to 20.
Factory default setting: *18 LINE [>> 18 line]
Note
When the system frequency is 60i, 23.98P, or 30P, the VBID
(Video Blanking ID) receives priority over a selection of
“20LINE”.
When the system frequency is 50i or 25P
22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from
9 to 22.
Factory default setting: *21 LINE [>> 21 line] (line 21)
PD PRESET [> PD preset]: Select the timecode to preset.
The A-frames of pulldown sequences are preset.
24F TC [>> 24F TC]: Preset 24-frame timecode.
30F TC [>> 30F TC]: Preset 30-frame timecode.
DISC PROTECTION [Disc protct]: Settings related to disc
protection Description
STILL TIMER [>> STL timer]: Specify the length of time the
unit can be in still image mode before switching to disc
protection mode.
0.5SEC [>>> 0.5 sec] to 30MIN [>>> 30 min]: Select time
from 16 settings ranging from 0.5 second to 30 minutes.
Factory default setting: *8MIN [>>> 8 min] (8 minutes)
VIDEO CONTROL [Video]: Settings related to video
control Description
INT VIDEO SG [> Video SG]: Select the test signal to be
output from the internal test signal generator.
*100% COLOR BARS [>> 100% bars]: 100% color bar signal
RAMP(Y/C) [>> Ramp]: Bias signal
GRAY [>> Gray]: Grayscale signal
BLACK BURST [>> BB]: Black burst signal
SETUP ADD [> Setup add]: Select whether to add black
setup to the composite video output signal.
*OFF [>> OFF]: Do not add setup.
ON (ADD) [>> ON]: Add setup.
CC (F1) BLANK [> CC1 blank]: Select whether to suppress
the closed caption signal to be superimposed on the 1st
field of the output video signal.
Note
When you play back a disc with a recorded closed caption
signal, the closed caption signal is multiplexed into composite
output only.
* OFF [>> OFF]: Suppress.
ON [>> ON]: Do not suppress.
TIME CODE [Time Code]: Settings related to the timecode
generator Description