Sennheiser EK 2000 IEM - Manual (Page 23)

22
Adjusting settings via the operating menu
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “ Name ” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver. The name is displayed on the
“
Frequency/Name ” standard display (see page 15). The name can consist
of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the balance – “Balance”
Frequency bank Channels Type
“ 1 ” to “ 20 ” up to 32 per
frequency bank System bank:
frequencies are factory-preset
“ U1 ” to “ U6 ” up to 32 per
frequency bank User bank:
frequencies are freely selectable
̈
Press the rocker button to select a character.
̈
Press the SET button to change to the next segment/character
or to store the complete entry.
Menu
L i c h a e l
Name
Name Name
L i c h a e l M i chael
“Stored”
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting
SET
Menu
0
Balance
Call up “Balance” Select the desired
setting
Store the setting
“Stored”
SET
SET
Balance
0
Balance
5