Sennheiser EK 2000 IEM - Manual (Page 24)

23
Adjusting settings via the operating menu
You can adjust the balance in 31 steps. In Focus mode (see next section)
and when one of the standard displays is shown, you can also use the
rocker button to adjust the balance. The mode of operation of the balance
setting depends on the selected audio mode (see next section).
Switching between “Stereo” and “Focus” mode – “Mode”
The selected audio mode influences the mode of operation of the balance
setting (see previous section).
Activating/deactivating the treble boost – “High Boost”
Via the “ High Boost ” menu item, you can boost the treble response of the
output signal (8 dB at 10 kHz).
Audio mode
Stereo Focus
The left-right signals are available
as usual.
The balance setting serves to
adjust the balance between the left
and right stereo signal.
The left-right signals are mixed and
are available as a mono signal in
both headphone channels.
The balance setting serves to
adjust the relative levels of the two
separate channels in the mixed
mono signal.
In both audio modes, the corresponding transmitter has to be set to
stereo mode!
Output signal remains unchanged High Boost activated
EQ EQ
Menu
Stereo
Mode
Call up
“Mute Mode”
Select the desired
setting
Store the setting
“Stored”
SET
SET
Mode Mode
Stereo Focus