Sennheiser EK 2000 IEM - Manual (Page 26)

25
Adjusting settings via the operating menu
Selecting a channel and assigning this channel a frequency
It is vital to observe the notes on frequency selection on page 28.
̈
Press the rocker button to set the MHz section of the
frequency.
̈
Press the SET button to confirm the MHz section of the
frequency.
The kHz section of the frequency is highlighted.
̈
Press the rocker button to set the kHz section of the frequency.
̈
Press the SET button to confirm the frequency.
“ Stored ” appears on the display panel. The “ Tune ” menu item
appears again.
̈
Press the rocker button until the “ Tune ” menu item appears.
̈
Press the SET button and keep it pressed until the frequency
bank is highlighted.
̈
Press the rocker button to set the frequency bank.
̈
Press the SET button to confirm the frequency bank.
The channel is highlighted.
Select the frequency
bank and confirm
Select the channel;
store the setting
Tu n e
B.Ch: U1. 1
Tu n e
Call up “Tune”
(special function)
Advanced Menu
Tune
“Stored”
823.925 MHz
823 .925 MHz
B.Ch: U1. 1
823. 925 MHz
SET SET
SET
SET
SET
SET
Select the frequency
bank and confirm
Select the channel;
store the setting
Tu n e
B.Ch: U1 . 1 B.Ch: U5. 1
Tu n e
Call up “Tune”
(special function)
Advanced Menu
Tune
“Stored”
823.925 MHz
823.925 MHz 823.925 MHz
SET SET
SET
SET