3) record event search, 4) alarm event search, 5) loss event list – Samsung SMT-190Dx User Manual
Page 29: 6) power event list, 7) basic playback, Eng-9
USER'S MANUAL
Eng-9
USER'S MANUAL
3. SEARCH START
- Input [YY/MM/DD] and [HH:MM:SS] to search and
press the ENTER ( ) button. And then, the related
data is searched.
- Use the , , , , key to change.
7-3) RECORD EVENT SEARCH
After pressing the search button, select the record event
search menu. The following screen is displayed.
07/07/07 00:00:01
RECORD EVENT SEARCH
ID
EVENT
DATE
TIME
001
RECORD START 05/01/05 0::8
00
RECORD START 05/01/05 01:0:00
00
TIMER START 05/01/05 00:9:1
If you press the REC button among the data recorded in
the HDD, the data list recorded is displayed. Select the
record event list with the , key. Press the
ENTER button to search it.
7-4) ALARM EVENT SEARCH
After pressing the search button, select the ALARM
EVENT SEARCH. The following is displayed.
07/07/07 00:00:01
ALARM EVENT SEARCH
ID
EVENT
DATE
TIME
001 ALARM START
01/01/05 1:5:0
00 MOTION START 01/01/05 10:10:15
- The data recorded on the HDD due to alarm
occurrence or motion is displayed by the recording
time. Select the ALARM/MOTION EVENT LIST by
use of the , key. And press the button to search
it.
7-5) LOSS EVENT LIST
The information including the channel, date and time is
displayed when VIDEO LOSS occurs.
07/07/07 00:00:01
LOSS EVENT LIST
NO CH MM/DD/YY
HH:MM:SS EVENT
01.08
07/0/07
0:07:8
LOSS
It is possible to check the list of next page by use of ,
key.
7-6) POWER EVENT LIST
Displays the date and time information with the list when
the power is turned on.
07/07/07 00:00:01
POWER EVENT LIST
NO MM/DD/YY
HH:MM:SS EVENT
0
01/01/05
0:07:8
POWER
0
01/01/05
0:11:56
POWER
0
01/01/05
00::
POWER
It is possible to check the list of next page by use of ,
key.
7-7) BASIC PLAYBACK
Press the PLAY/STILL button to play the data recorded in
the HDD immediately.
Playback starts displaying the following screen.
Play 07/01/05 00:00:01
CAM1
CAM
CAM
CAM
CAM5
CAM6
CAM7
CAM8
If there is no data recorded, "NO DATA" message is
displayed.
NO DATA
Note
- If the user is in the menu, the playback does not
start even if the PLAY button is pressed. Exit from
the menu first to start the playback.
- Press the stop button to stop the playback. If the
PLAY/STILL button is pressed again, the system
starts the playback from the last stop.
- If the final data of HDD finishes playing back, the
first data of HDD is played again.
USER'S MANUAL