Samsung SMT-190Dx - Manual (Page 53)

USER'S MANUAL
Eng-5
 System ID : 0 ~9
System ID
Move Enter Return
0
1



5
6
7
1. Press the MENU and / button to select the
Setup menu.
. Press the ENTER or  button.
. Press the / and ENTER button to select the
System ID.
. Press the / and ENTER button to select the
setting you want. (0~9)
5. Press the MENU or  button repeatedly to exit.
Note
You must set the same SYSTEM ID of the DVR menu
and LCD menu to use system ID function.
and set the same SYSTEM ID for the remote
controller too. If the SYSTEM ID of the DVR menu is
differ from the LCD menu's, the remote controller may
not operate properly. Set the SYSTEM ID of the LCD
menu at LCD menu > Setup Menu > System ID.
Press the number button that you want on the remote
controller while SYSTEM ID button is pressed for
setting the SYSTEM ID of the remote controller.
 Reset : Image, Color - VGA mode only
Setup
Language : English 
Transparancy : Medium 
System ID : 0 
Reset 
Move Enter Exit
Reset
Move Enter Return
Image Reset
Color Reset
If you didn't select VGA input, this menu is not
available.
1. Press the MENU and / button to select the
Setup menu.
. Press the ENTER or  button.
. Press the / and ENTER button to select the
Reset.
. Press the / and ENTER button to select the
setting you want.
Move Enter Return
Image Reset
OK Cancel
5. Press the / and ENTER button to selelct the
OK or Cancel.
6. Press the MENU or  button repeatedly to exit.
USER'S MANUAL USER'S MANUAL