Samsung SMT-190Dx - Manual (Page 43)

USER'S MANUAL
Eng-
Chapter 9 : Functions
9-1) FREEZE KEY
(REMOTE CONTROLLER)
If the "FREEZE" key is pressed, the "II" Marker is
displayed at the top right screen and the screen is frozen.
Press the "FREEZE" key again to make the "II" Marker
disappear and cancel the FREEZE function.
07/01/05 00:00:01
CAM1 CAM CAM
CAM CAM5 CAM6
CAM7 CAM8
9-2) ZOOM MODE DISPLAY
(REMOTE CONTROLLER)
When users want to see a zoomed image of a specific
area of the display, press the ZOOM KEY to display the
selected area. Select the targeted zoom area by using
 /, / KEY and press the ENTER SWITCH, then the
selected area will be displayed at full single mode with
zoomed area doubled. When Zoom is used in SINGLE
DISPLAY MODE (CH), the operation will be carried out
as shown in figure below. (You can select nine Zoom
areas on the screen in SINGLE DISPLAY MODE.)
07/07/07 00:00:01
CH
07/07/07 00:00:01
CH2


CH SINGLE DISPLAY
Press ZOOM
KEY
ZOOM area is activated.
07/07/07 00:00:01
ZOOMX
CH
07/07/07 00:00:01
CH2

Press ENTER
KEY
The selected area will
be doubled and at FULL
DISPLAY.
Press,  KEY, and
move to desired location
9-3) PIP MODE DISPLAY
(REMOTE CONTROLLER)
PIP Mode Display is used to view the PIP screen in
Single screen mode. If you press SEQUENCE, the PIP
Sub- screen will change. If you press the / KEY, the
sub screen can be transferred to another channel.
Sub-screen location can be selected in CLOCK/DISPLAY
MENU in SETUP MENU.
07/07/07 00:00:01
CH CH1
07/07/07 00:00:01
CH1 CH

PIP DISPLAY
Press ENTER
KEY
Main and Sub screen is switched
07/07/07 00:00:01
CH1 CH
07/07/07 00:00:01
CH1 CH

PIP DISPLAY
Press
 /
KEY and
ENTER
Main screen is switched
07/07/07 00:00:01
CH1 CH
07/07/07 00:00:01
CH1

Single screen display
Press PIP
KEY
Main and Sub screen is
displayed as set in the DISPLAY
MENU of SETUP MENU
07/07/07 00:00:01
CH1 CH
07/07/07 00:00:01
CH1 CH

PIP DISPLAY
Press
SEQUENCE
KEY
Sub screen is switched
S S
USER'S MANUAL