Samsung SMT-190Dx - Manual (Page 46)

Eng-6
USER'S MANUAL USER'S MANUAL
Chapter 10 : Monitor
Setup Menu
No Signal Display
When there is no connection at the VGA input, the On
Screen Display will show this message.
<VGA mode>
Check signal cable.
VGA
OSD Menu Selection
Press DVR/LCD button to select LCD MENU or DVR
MENU by turns. If DVR/LCD LED is green,it means LCD
mode. if it is red, it is DVR mode.
A. Input Menu
Input
Source List : DVR 
PIP 
Edit Name 
Move Enter Exit
Inputs can be set to VGA mode.
1. Press the MENU and ENTER button.
. Press the ENTER or  button and then /
button to select input menu.
. Press the ENTER or button to save the setting
and exit.
 PIP ON (VGA mode only)
PIP
Move Enter Return
PIP : Off 
Size : 
Position : 
If you didn't select VGA input, this menu is not available.
1. Press the MENU and ENTER button.
. Press the / and ENTER button to select the
PIP menu.
. Press the ENTER or  button to see the sub menu.
. Press the / and ENTER button to select On.
5. Press the MENU or  button repeatedly to exit.
USER'S MANUAL