Samsung SMT-190Dx - Manual (Page 49)

USER'S MANUAL
Eng-9
 If you select the Brightness, then the picture below
appears on the screen.

Brightness

80
 Color Tone
DVR mode : Cool2, Cool1, Normal, Warm1,
Warm2
 Tint feature is enabled while input signal is NTSC
mode.
Color Tone
Cool
Cool1
Normal
Warm1
Warm
Move Enter Return
<Video mode>
1. Press the MENU and / button to select the
Picture menu.
. Press the ENTER button.
. Press the / and ENTER button button to select
the Color Tone menu.
. Press the / button to select the setting you
want.
5. Press the MENU or  button repeatedly to exit.
 Under Scan : Over, Under
Picture
Move Enter Exit
Mode : Movie 
Custom 
Color Tone : Warm 
Under Scan : Under 
NR : On 
Under Scan
Move Enter Return
Over
Under
1. Press the MENU and / button to select the
Picture menu.
. Press the ENTER or  button.
. Press the / button to select the Under Scan
menu.
. Press the ENTER or  button.
5. Press the / button to select the scan mode you
want.
6. Press the MENU or  button repeatedly to exit.
 You can't see the edge of the screen in the Over scan
mode. but you can see the whole screen in the Under
scan mode.
 NR(Noise Reduction) : On, Off
Picture
Move Enter Exit
Mode : Movie 
Custom 
Color Tone : Warm 
Under Scan : Under 
NR : On 
If you didn't select DVR input, this menu is not available.
1. Press the MENU and ENTER button.
2. Press the ▼/▲ and ENTER button to select the NR
menu.
. Press the ENTER or  button to see sub menu.
4. Press the ▼/▲ and ENTER button to select the Off
or On.
5. Press the MENU or  button repeatedly to exit.