Connections, Connections connection to a tv, Basic audio connection – Symphonic CHSP80G User Manual
Page 16: Video connections, Plug in the ac power cord of this unit, If your tv is not compatible with progressive scan, You can connect to tv with a/v cables and rf cable, Method 2 method 3, This unit method 1, Component video out
16
Connections
EN
COMPONENT
VIDEO OUT
Connections
Connection to a TV
Choose one of the following connections, depending on the capabilities of the equipment you possess.
Note
• Connect this unit directly to the TV.
• You will not be able to hear all of the sound being output by this unit if you use the video/audio cables
(supplied) to a monaural TV that has only one audio input jack.
• Be sure that the colors of the jacks and plugs match up when connecting the cable.
• If your TV is compatible with the Progressive Scan System, and you want to utilize its feature, use the
COMPONENT VIDEO OUT connection. If you use any other connection such as VIDEO OUT or S-VIDEO OUT,
the picture will not be output in the Progressive Scan mode but in the standard output mode (Interlace).
Basic Audio Connection
If your TV is compatible with 525p (480p) progressive scanning and you want to enjoy the high quality picture;
You must select the connection Method 3 to utilize the progressive scanning mode.To set the mode on/off, press and
hold B PLAY on the front panel for more than 5 seconds so that “P-SCAN” will appear on the Front Panel Display.
(The progressive scanning is not available in the DVR mode.)
If your TV is not compatible with Progressive Scan;
Use this unit in the interlace mode. Make sure that no “P-SCAN” is on the Front Panel Display. If “P-SCAN” is on
the Front Panel Display, press and hold B PLAY on the front panel for more than 5 seconds to turn it off.
Note
• You can connect to TV
with A/V cables and RF
cable.
Video Connections
T
L
R
Y
P
B
/
C
B
P
R
/
C
R
O OUT
AUDIO IN
L
R
OUT
IN
ANTENNA
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
VIDEO IN
1
(Back of TV)
Plug in the AC power
cord of this unit.
or
Cable
TV signal
or
Cable
TV signal
Connect
Disconnect
Antenna
Antenna
(Back of this unit)
(Back of TV)
RF cable
(supplied)
Connect
3
2
1
4
AUDIO OUTPUT
/BITSTREAM
COAXIAL
VIDEO OUT
L
R
Y
P
B
/
C
B
P
R
/
C
R
AUDIO OUT
AUDIO IN
L
R
OUT
IN
ANTENNA
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
VIDEO IN
L
R
2
1
VIDEO OUT
L
R
AUDIO OUT
L
R
2
1
OUT
S-VIDEO
Y
P
B
/
C
B
P
R
/
C
R
COMPONENT
VIDEO OUTPUT
VIDEO OUT
L
R
AUDIO OUT
L
R
2
1
AUDIO IN
VIDEO IN
S-VIDEO IN
C
B
Y
C
R
COMPONENT
VIDEO IN
AUDIO OUT
TV
Basic Audio
Method 2
Method 3
Better picture
Best picture
S-VIDEO OUT
Audio cable
(supplied)
Component
video cable
(commercially
available)
This unit
Method
1
Good picture
VIDEO OUT
Video
cable
(supplied)
S-Video
cable
(commercially
available)
(Compatible
with the
Progressive
Scan mode)
E41A1CD(16-25).qx3 06.3.2 11:25 AM Page 16