Symphonic CHSP80G - Manual (Page 32)

DVR (Recording)
EN 32
Recording & Playback Navigator
Guide to the Programmed
Recordings Screen
With the Recording & Playback Navigator, you can easily
program the Timer Recordings for the DVR by using the
calendar displayed on the screen. Also the recorded titles
(programs) can be played back or edited just by selecting the
titles on the display.
• When you press PROGRAM RECORDINGS, the
Programmed Recordings Screen will be displayed on the
TV screen.
1 Preview window:
Playback the preview of recorded programs.
2 Information:
Shows the information on the selected program.
3 Previous recordings:
When the normal recording / Timer Recording has
started, the cell turns blue and the channel number will be
displayed. (e.g.
)
4 Scheduled Recordings:
When a programming is completed, the cell turns pink and
the channel number will be displayed. (e.g.
)
Programmed Recordings Screen shows a two-week calendar.
(One week prior to and one week after the current day.)
• Programmed Recordings can be programmed in this
screen for programs broadcasted during next week.
• If more than one week has passed since recording, the
recorded programs cannot be replayed or edited with
Programmed Recordings.
• The screen describes each day as a day of the week,
other than TODAY.
B
A
PROGRAMMED RECORDINGS
Previous Recordings Scheduled Recordings
SAT SUN MON TUE WED THU FRI SUN MON TUE WED THU FRI TODAY SAT
Scheduled Completed
4
5
6
7
8
9
AM
6:00AM - 7:00AM
CH 4
6
4
1 2
3
B
A
Programmed Recordings Screen
CH
2
8
4
CH
CH
CH
DVR DVR DVR
SEARCH REPEAT A-B
DISPLAY RETURN
REV FWD PLAY
REC/OTR STOP PAUSE
SKIP DVR DVD
POWER
SUB TITLE
ENTER
TOP MENU
ANGLE AUDIO
SET UP
TIMER
PROG. OPEN/CLOSE
CHANNEL
1 2 3
4
7 8 9
0
5 6
SKIP
MENU
CLEAR
ZOOM
MODE +10
PROGRAM
RECORDINGS
TIMER
PROG.
CHANNEL
1 2 3
4
7 8 9
0
5 6
CLEAR
PROGRAM
RECORDINGS
ENTER
Note
• With the Recording & Playback Navigator, you can
program Timer Recordings up to one week ahead.
The recordings programmed for the days more than
one week ahead will not be displayed in the
Programmed Recordings Screen.
• You can program more than 1 Timer Recordings in
one cell, but only the timer program that has the
earlier starting time will be displayed in the
Programmed Recordings Screen.
• To see all the programs entered in a cell, press
REV h h or FWD g g .
• If power is failed or unplugged from the outlet, some
information in the Programmed Recordings Screen
may be lost.
• Only the titles in the DVR can be played back using
the Recording & Playback Navigator.
E41A1CD(26-35).qx3 06.3.2 11:24 AM Page 32