Symphonic CHSP80G - Manual (Page 31)

31
DVR (Recording)
EN
Connections
DV
R
DV
D
Others
Bef
o
re
Y
ou
Star
t
Timer Recording (Cont’d)
To delete a program from the list:
1. Using / , select “Delete”, then press
ENTER.
Confirmation window will appear.
You can access this screen by pressing CLEAR
instead of ENTER at step 2.
2. Using / , select “Yes” if you want to delete
the title.
Then, press ENTER.
4 Press TIMER PROG. to exit.
Delete this Delete this Timer Prog Timer Program? am?
Yes No
Hints for Timer Recording
The priority of overlapped settings
When the timer programmings are overlapped, you will
receive a warning message.
If this happens, check the timer programming and change the
programming as necessary. Otherwise, the unit will prioritize
recording as described below.
Same start time and different end time:
The program set first has the priority.
Different start time and different end time:
A program with the earlier start time has the priority.
Recording time is entirely overlapped:
PROG.
2 will not be recorded.
End time of Program 1 is the same as the
start time of Program 2:
PROG. 1
PROG. 2
Actual
recording
The last 30 seconds (at the longest) will be cut off.
PROG. 2 PROG. 1
PROG. 1
PROG. 2
Actual
recording
PROG. 1
PROG. 1
PROG. 2
Actual
recording
PROG. 1
PROG. 2
PROG. 3
PROG. 3
The first 15 seconds (at the longest) will be cut off.
PROG. 1
PROG. 2
Actual
recording
PROG. 2
The first 15 seconds (at the longest) will be cut off.
PROG. 1
Note
• As to the timer program in progress (which is shown
in red in the Timer Programming List), you only can
edit the end time.The changes made during recording
will be recognized as only specific to that recording
in progress and it will not affect the daily or the
Weekly Recording Setting.
E41A1CD(26-35).qx3 06.3.2 11:24 AM Page 31