Connections, Connection to an audio system – Symphonic CHSP80G User Manual
Page 18
18
Connections
EN
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
* To complete these settings. (See page 53 for DVR and 8
2
for DVD.)
If output is Dolby Digital
encoded audio, connect to a
Dolby Digital decoder.
Unless connected to a Dolby
Digital decoder.
Connecting to an MD deck or
DAT deck.
Stream
PCM
PCM
SETUP >Initial Setup >Playback >Audio Out >
Dolby Digital
Setting
Connection
Note
• By connecting this unit to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital Multi-channel surround sound as heard in the
movie theaters.
• The audio source on a disc in a Dolby Digital Multi-
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
VIDEO OUT
L
R
AUDIO OUT
L
R
2
1
Stereo system
AUDIO
Method
1
Analog audio
input jacks
Digital audio
input jack
AUDIO OUT
DIGITAL
AUDIO OUT
Method 2
Audio cable
(supplied)
Audio Coaxial
Digital cable
(commercially
available)
Dolby Digital decoder,
MD deck or DAT deck
This unit
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
COAXIAL
COAXIAL
For DVR mode:
If output is Dolby Digital
encoded audio, connect to a
Dolby Digital decoder.
Unless connected to a Dolby
Digital decoder.
Connecting to an MD deck or
DAT deck.
BITSTREAM
PCM
PCM
SETUP >QUICK >DOLBY DIGITAL >
DOLBY DIGITAL
Setting
Connection
For DVD mode:
E41A1CD(16-25).qx3 06.3.2 11:25 AM Page 18