SpectraLink h340 - Manual (Page 41)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
with SIP
PN: 72-1089-02-D.doc Page 41
7. Testing a Handset
Verify proper registration and operation of each handset by performing the
following tests on each handset in an active wireless area.
1. Power on the handset by pressing the
Power On key. A series of messages will be
displayed as the handset acquires the system. The handset should display the user
extension.
2. Place a call and listen to the audio quality. End the call by pressing the End Call
key.
3. Place a call to the handset and verify ring, answer, clear transmit, and clear
receive audio.
4. Use the softkeys to verify all softkey programmed features on the handset.
5. Press the
End Call key. Any line indicators should turn off and the extension
number display will return.
If any of these steps fails to operate as described, refer to Section 11 Troubleshooting
for corrective action.