Symbol Technologies MC50 - Manual (Page 24)

MC50 User Guide 1-8
Using the CAM
To charge the mobile computer’s battery using the CAM:
1. Attach the CAM to the bottom of the mobile computer.
2. Plug the power connector into the power port, and the other end to a power source.
Figure 1-5. Charging using the CAM
The standard battery usually fully charges in approximately 2.5 hours and the optional larger capacity battery usually fully charges in
approximately five hours. See
Table 1-2 on page 1-7 for mobile computer charging indications.
Calibrating the Battery
The MC50 battery requires periodic calibration to maintain an accurate calibration of the battery's gas gauge. To calibrate the battery,
deplete the battery completely from a full charge condition. Symbol recommends performing this once a week.
CAM
Power Supply