Symbol Technologies MC50 - Manual (Page 30)

MC50 User Guide 1-14
the magnetic stripe card through the reader, ensuring the magnetic stripe on the card is positioned as shown. Data encoded on the
magnetic stripe displays in the mobile computer window.
Figure 1-14. Swiping a Card
The card may be swiped in either direction, from left to right, or from right to left. For best results, gently
press down on the card while swiping to ensure contact with the bottom of the reader.
Installing a Secure Digital Card
Use Secure Digital (SD) memory cards to save or back up data.
To install an SD memory card:
1. Power off the mobile computer.
2. Remove the screw securing SD cover and lift the cover out of the slot.
3. If a card is already installed, press the card in to release it, and then remove it.
Figure 1-15. SD Card Installation
4. Ensure that the card is oriented correctly, and slide it into the slot until you feel a click.
Do not force the card. If you feel resistance, remove the card, check the orientation, and reinsert it.