Magnetic stripe reader (msr), Attaching and removing, Using the msr – Symbol Technologies MC50 User Manual
Page 63: Magnetic stripe reader (msr) -9, Attaching and removing -9 using the msr -9
Accessories
3-9
Magnetic Stripe Reader (MSR)
This section describes how to set up and use the snap-on MSR with the mobile computer. The MSR snaps on to the bottom of the
mobile computer and can be easily removed when not in use.
When attached to the mobile computer, the MSR allows the mobile computer to capture data from magnetic stripe cards. To download
MSR data capture software, visit
Attaching and Removing
To attach, slide the MSR onto the bottom of the mobile computer and secure by snapping the arms into the mobile computer housing.
Figure 3-7. MSR Installation
To remove the MSR open the arms and pull the MSR from the mobile computer.
Using the MSR
The MSR3000 sample application illustrates how an application should handle MSR inputs (refer to Symbol Applications User’s
Guide).
To use the MSR:
1.
Attach the MSR to the mobile computer.
2.
Power on the mobile computer.
3.
Tap Start - MC50 Demo - Test Apps - MSR MC50 or MSR Cameo to start the sample application.
Card Reader Slot
Arms