Sierra Wireless AIRPRIME WISMO218 - Manual (Page 89)

WA_DEV_W218_PTS_002 Rev 006 April 29, 2010 89
Product Technical Specification &
Customer Design Guidelines Technical Specifications
5.4. Reliability Compliance and Recommended
Standards
5.4.1. Reliability Compliance
The AirPrime WISMO218 embedded module connected on a development kit board application is
compliant with the following requirements.
Table 43: Standards Conformity for the AirPrime WISMO218 Embedded Module
Abbreviation Definition
IEC International Electro technical Commission
ISO International Organization for Standardization
5.4.2. Applicable Standards Listing
The table hereafter gives the basic list of standards applicable to the AirPrime WISMO218 embedded
module.
Note: References to any features can be found from these standards.
Table 44: Applicable Standards and Requirements
Document
Current
Version
Title
IEC6006826 7.0 Environmental testing - Part 2.6: Test FC: Sinusoidal Vibration.
IEC60068234 73
Basic environmental testing procedures part 2: Test FD: random vibration
wide band - general requirements
Cancelled and replaced by IEC60068-2-64. For reference only.
IEC60068264 2.0
Environmental testing - part 2-64: Test FH: vibration, broadband random and
guidance.
IEC60068232 2.0
Basic environmental testing procedures - part 2: Test ED: (procedure 1)
(withdrawn & replaced by IEC60068-2-31).
IEC60068231 2.0
Environmental testing part 2-31: Test EC: rough handling shocks, primarily for
equipment-type specimens.
IEC60068229 2.0
Basic environmental testing procedures - part 2: Test EB and guidance: bump
Withdrawn and replaced by IEC60068-2-27. For reference only.
IEC60068227 4.0 Environmental testing - part 2-27: Test EA and guidance: shock.
IEC60068214 6.0 Environmental testing - part 2-14: Test N: change of temperature.
IEC6006822 5.0 Environmental testing - part 2-2: Test B: dry heat.
IEC6006821 6.0 Environmental testing - part 2-1: Test A: cold.
IEC60068230 3.0
Environmental testing - part 2-30: Test DB: damp heat, cyclic (12 h + 12 h
cycle).
IEC6006823 69 w/A1
Basic environmental testing procedures part 2: Test CA: damp heat, steady
State
Withdrawn and replaced by IEC60068-2-78. For reference only.
IEC60068278 1.0 Environmental testing part 2-78: Test CAB: damp heat, steady state.