SMSC EZ Card 10 - Manual (Page 20)

Running the Setup Program
Insert the driver diskette in your floppy drive. The SETUP pro-
gram is in the \SETUP subdirectory on this diskette. Change to
the appropriate subdirectory location, type the following com-
mand and press <Enter>:
A:\SETUP>SETUP
This will initiate the menu-driven SETUP program and display
the Main Menu as shown below:
Figure C-1. Main Menu
C ONFIGURATION AND D IAGNOSTICS
C-2
EZ Card PCI 3/31/98 4:18 PM Page C-2