SMSC EZ Card 10 - Manual (Page 9)

Hardware Description
The SMC EZ Card 10 PCI model shown below has two LED
indicators and supports three types of network connections.
Your model may support only one or two network connections.
Figure 1-1. EZ Card 10 PCI Combo Model (SMC1208BTA)
LAN Connectors
The EZ Card 10 PCI models support IEEE 802.3 10BASE-T,
10BASE2 and 10BASE5 standards. These cards also support one
or more of the following network connections, depending on
the model chosen:
• RJ-45 connector for twisted-pair cable
• BNC connector for thin coax cable
• AUI connector for thick coax cable
On the 2-port combo model, the media type in use is automati-
cally detected by the driver.
1-2
I NTRODUCTION
EZ Card PCI 3/31/98 4:18 PM Page 1-2