Standard Horizon CPV550 - Manual (Page 43)

Page 43 CPV550
7.1.3 Changing the Ships Icon
The cursor may be changed to any of the following:
Figure 7.1.3 - Ship icons
1. From the Chart Page, press [MENU] twice. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight SHIP ICON and press [ENT] or move the
ShuttlePoint knob to the right to show the popup window with ship icons.
3. Move the ShuttlePoint knob to select the desired icon and press [ENT] or move the
ShuttlePoint knob to the right to select a new icon.
4. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the
Chart page.
7.1.4 Changing the backlight and contrast
With the GPS Chart Plotter turned On, briefly press [PWR] to show the light and contrast
popup window. Move the ShuttlePoint knob to the left or right to adjust the LCD backlight
intensity or up or down to change the LCD contrast. Press [ENT] to set.
Figure 7.1.4 - Backlight and Contrast adjustment
7.1.5 Selecting North Up or Course Up
The default selection is COURSE UP. This means the top of the display will be orientated
to the direction the vessel is heading. To change to North up refer to the proceedure below.
Figure 7.1.5 - Course Up/North Up menu
1. From the Chart Page, press [MENU] twice. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight COURSE UP/NORTH UP and press [ENT] or
move the ShuttlePoint knob to the right.
3. Another popup window will be shown with NORTH UP and COURSE UP, move the