Standard Horizon CPV550 - Manual (Page 97)

Page 97 CPV550
18.14.1 Voice Scramble Operation
1. Turn on the transceiver.
2. Select a channel that was programmed for scrambler mode (“VS”
will appear in the “VHF Radio” window on the display).
3. If a channel is not set for the voice scrambler, “VS” will disappear
from the display.
4. If a voice scrambler is canceled temporarily in the “SETUP” menu, the display will be
as shown in the illustration at the right.
5. Monitor the channel before transmitting.
6. Transmit the voice message. The signal sent will be scrambled.