Standard Horizon CPV550 - Manual (Page 63)

Page 63 CPV550
12.0.4 Changing the slot
You may want to change the "active" slot, the slot which contains the working User
C-CARD.
1. From the chart page, press the [MENU] key. Move the ShuttlePoint knob to
highlight USER POINTS and press [ENTER] or move the ShuttlePoint knob to the
right.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENTER] or
move the ShuttlePoint knob to the right.
3. Open the door, insert another User C-CARD into a free slot.
4. Move the ShuttlePoint knob to highlight CHANGE and press [ENTER]. This "new"
User C-CARD is now ready to receive and store information.