Standard Horizon CP180 User Manual
Page 58
Page 60
CP180 / CP180i
11.0.1 Transferring files to the optional User C-CARD
1. Remove a C-MAP NT
+
/MAX
C-CARD if present and insert the optional User
C-CARD into the slot.
2. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENTR]
.
3. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
.
4. A screen will appear. Move the ShuttlePoint knob to the left to highlight SAVE and
press [ENT].
5. A popup SAVE FILE window will appear. In this window you can change the name
and the file type by using the ShuttlePoint knob and pressing [ENT], when finished
press [CLR] once.
6. To save the file to the User C-CARD.
11.0.2 Loading a file
If you have a problem and accidentally loose the User Points in the GPS chart plotter
with the optional User C-CARD it is possible to load the data back into the GPS chart
plotter using the following procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
.
3. Select the saved file from the USER C-CARD list by using the ShuttlePoint knob
and press [ENT].
4. Move the ShuttlePoint knob to the left to highlight LOAD and press [ENT].
5. A popup information window will appear when loading is complete.
6. Press [ENT] to confirm.
11.0.3 Deleting a file from the User C-CARD
You may want to delete a saved file on the User C-CARD.
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
.
3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and
press [ENT].
4. Move the ShuttlePoint knob to the left to highlight DELETE and press [ENT].
5. A popup Warning window will to confirm you want to delete the file.
6. Press [ENT] to confirm.
11.0.4 Refreshing the User C-CARD
You may want to change the User C-CARD inserted in the slot with a new one.
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].
3. Move the ShuttlePoint knob to highlight REFRESH and press [ENT].
4. Remove the User
C-CARD and insert the new one into the slot. Press [ENT].