Standard Horizon CP180 - Manual (Page 60)

Page 62 CP180 / CP180i
Speed Over Ground and
Course Over Ground
4
Cursor coordinates 2
Fix Status 1
Distance and Bearings from Fix to
Cursor (if the Fix is NOT received,
DST and BRG are empty)
3
Chart Scale 5
4
3
2
1
5
WAAS
Figure 12.0 - Charts and general text area
12.0.0 Window Selections
The window on the right side of the Chart page is called the General Window and it may be
edited, customized or even changed to show a highway or compass tape.
FULL CHART (None) GENERAL 1 LINE SMALL 1 LINE LARGE
WAAS
2 LINES SMALL HIGHWAY COMPASS
Figure 12.0.0 - Data window layout
1. To change, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight WINDOW SETUP and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight CHART PAGE and press [ENT] or move the
ShuttlePoint knob to the right.
5. Select the desired window, HIGHWAY or COMPASS, and press [ENT] or move the
ShuttlePoint knob to the right.
6. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page.
12.0.1 Additional Functions on Chart page
When on the Chart page you will notice icons of Buoys, Towers, Lights, Wrecks, Tide
Stations and Port Icons. If the cursor is moved over the top of these icons a popup window
will be shown with information about the icon.