Sharp MD-C2H - Manual (Page 29)

<P=004>
(Continued)
■
Repeat and random play
1
Select the desired programme source, MD or CD, by pressing
the MD or CD button.
2
Press the PLAY MODE button.
● Each time this button is pressed, the mode will change in the
following order:
PLAY
MODE
PLAY
MODE
CD
MD
1 -
MD PLAY
3 1 -
CD PLAY
3
CD
MD
1 -
MD/CD PLAY
3
Repeat play Random play Normal play
3
Press the 0 6 button to start playback.
● To play only the disc you specify, press one of the MD PLAY
1
0 - 3 0 buttons or CD PLAY 1 0 - 3 0 buttons.
Repeat play
After the last track has been played, playback will return to the
first track and begin again.
Random play
All of the tracks on all of the discs can be played in random order
automatically.
● If you press one of the MD PLAY 1 0 - 3 0 buttons or CD
PLAY 1 0 - 3 0 buttons, you cannot play the tracks on the
specified disc randomly.
To cancel repeat or random play:
Press the PLAY MODE button until the " R " or "RANDOM" display
disappears.
To repeat playback of selected tracks:
Enter the programme for the tracks you want and start repeat
play.
You can programme a single track and play it repeatedly (Refer
to page 29).
Notes:
● When using random play or repeat play, be sure to press the
■ button after you are finished listening. Otherwise, the disc
will play continuously.
● During APMS play, random play is not possible.
● When random or repeat play is selected during CD or MD
playback, random or repeat play will start at that point.
● In random play the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
● When you open the CD tray during CD random play or when
you remove the MiniDisc during MD random play, normal play
will resume at that point.
● You cannot make a one-touch editing using repeat or random
play. (See page 32)
Repeat indicator Random indicator Disappears
MD-C2H(SUK) TINSE0238AWZZ
28