Sharp MD-C2H - Manual (Page 41)

<P=004>
(Continued)
■
Erase
Before making editing changes, check the disc number.
ENTER
NAME/
TOC EDIT
To erase tracks one at a time:
1
Whilst in the stop mode, select the track you want to erase
using the jog dial.
Or start playing the track to be erased, and then press the
0 6 button to enter the pause mode.
2
Press the NAME/TOC EDIT button, and within 10 seconds,
select "ERASE" using the jog dial.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the ■ button.
4
Press the ENTER button again.
● The track is erased, and the unit is stopped at the beginning
of the previous track.
● When a track is erased, the numbers assigned to the tracks
following the erased track will be automatically decreased by
one.
Notes:
● Once a track has been erased, it cannot be recovered. Double-
check the track number before erasing it.
● When a track is erased, the track name will be erased at the
same time.
● This function cannot be used whilst a programme is being en-
tered ("MEMORY" is lit: Page 29) or whilst in the random play
mode ("RANDOM" is lit: Page 28). First, cancel the programme
or random play mode before trying to use this function.
Before making editing changes, check the disc number.
To erase all of the tracks at once:
1
Press the ■ button.
● The total number of tracks and the total playing time on an
MD will appear.
2
Press the NAME/TOC EDIT button, and within 10 seconds,
select "ALL ERASE" using the jog dial.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the ■ button.
4
Press the ENTER button again.
● All of the track numbers, names and disc name will be erased.
Note:
● This function cannot be used whilst a programme is being en-
tered ("MEMORY" is lit: Page 29) or whilst in the random play
mode ("RANDOM" is lit: Page 28). First, cancel the programme
or random play mode before trying to use this function.
1
2
3
4
2
3
4
Jog dial
ENTER
NAME/
TOC EDIT
Jog dial
MD-C2H(SUK) TINSE0238AWZZ
40