Sharp AR-164 - Manual (Page 20)

18
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE key or manually with the PRESET RATIO selector (
,
) keys and/or the zoom ( , ) keys. The zoom function enables precise
copy ratio selection from 50% to 200% in 1% increments.
Reduction/enlargement/zoom
Automatic
1 Place the original in the document feeder tray or on the
original table.
2 When using the original table, press the ORIGINAL SIZE
ENTER key until the indicator for the size of the original
on the original table lights up.
3 Use the TRAY SELECT key to select the paper tray with
the desired paper size.
● This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
4 Press the AUTO IMAGE key.
● The copy ratio will be automatically set.
● If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
If user program No.7 is not set and the orientation of
the original does not correspond to standard reduction/
enlargement ratios for the selected paper tray, the
ORIGINAL SIZE indicator will blink. Change the
orientation of the original.
5 Set the number of copies.
6 Press the START key.
● To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.
● When copying from the SPF with this feature, the
automatic reduction/enlargement mode will be
automatically canceled after copying is complete.