Sharp AR-164 - Manual (Page 26)

24
MAKING COPIES
Sort/group
SORT/GROUP
Copying in the sort mode
When copying in the sort mode, the original image will be stored in the copier
memory each time an original is scanned and copying will start after all
originals have been scanned.
1 Set the originals face up in the document feeder tray.
● The original table cannot be used for sort copying.
2 Press the SORT/GROUP key to select the SORT mode.
3 Ensure that the copy paper size in the paper tray is the
same size as the originals.
● If an optional paper feed unit is installed, a paper tray with the
corresponding paper size will be automatically selected.
4 Set the number of copies and press the START key.
● Copying will start after the originals have been scanned. Up to 30
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of 8-1/
2" x 11" originals can be scanned. However,when copying originals
which require more memory such as photographs, the number of
originals which can be scanned will be less.) When the memory
becomes full of scanned original image data, the ORIGINAL DATA
indicator will blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.