Sharp AR-164 User Manual
Page 31
29
SPECIAL FEA
TURES
XY zoom
XY ZOOM
5
Use the PRESET RATIO selector (
,
) keys and zoom
(
,
) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
6
Press the copy ratio display (
) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
) key. The vertical and horizontal ratios will be alternately displayed.
7
Ensure that copy paper of the desired size is installed in
the paper tray.
●
If an optional paper feed unit is installed:
When copying from the original table, use the ORIGINAL SIZE
ENTER key to select the original size. Copy paper of the appropriate
paper size will be automatically selected based on the original size and
copy ratios. If desired, another paper tray can be selected by pressing
the TRAY SELECT key.
8
Set the number of copies.
9
Press the START key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
,
) key or a zoom (
,
)
key. Then, perform step 3 and the succeeding
steps.
●
To cancel this function, press the XY-ZOOM key
again.