Savin 1232 - Manual (Page 25)

Initial Scanner Setup
21
2
Setting Scanner Features
Various Scanner Features (resolution,
scan size, scan type, image density)
can be set here. When using the same
type of original repeatedly, storing
the optimum settings in advance
makes them easy to select whenever
you deliver or store scan data.
Note
❒ Ten sets of scan settings named
“Initial Setup” and “Program 1” -
“Program 9” can be stored for
quick recall. The settings stored as
“Initial Setup” are the scanning de-
faults. If the Scanner Features are
not selected during delivery, the
originals are scanned with the
Scanner Features stored in the “In-
itial Setup”.
❒ “Program 1” - “Program 9” can be
changed to any name of up to 20
characters.
The Scanner Features consist of the
following items.
❖ ❖ ❖ ❖ Scan Type
The scan method suitable for the
original is set.
For black & white or gray scale
scans, select from the following
types.
• Text (Print)
Standard original containing
mainly text (Print)
• Text (OCR)
Standard original containing
mainly text (for OCR)
• Text/Photo
Original containing a mixture of
text and photographs
• Photo
Original containing photo-
g r a p h s a n d o t h e r p ic t u re s
(white & black)
• Gray Scale
Original containing photo-
graphs and other pictures (gray
scale/full color)
When the original is scanned in
full color, the following items
should be set.
• Text (full color)
Standard original containing
mainly text
• Photo (full color)
Original containing photo-
graphs or other pictures
Note
❒ Printer printing is best done
with Text (Printer). Text (OCR)
is suitable for higher OCR accu-
racy.
❒ An image is scanned with black
& white in “Photo”, and with
gray scale/full color in “Gray
Scale”. As a general rule, scan-
ning for the purpose of printing
is best done with “Photo”, and
scanning for viewing on the
computer screen with “Gray
Scale”.
❖ ❖ ❖ ❖ Resolution
Set the resolution to 100 dpi, 200
dpi, 300 dpi, 400 dpi, or 600 dpi.
❖ ❖ ❖ ❖ Image Density
Set the image density for Black &
White/Gray Scale scanning. The
setting can be made in Auto Image
Dens ity or se ven step s, from
“Lighter” (1) to “Darker” (7).
For full color scans, set the image
density. It can be set in seven steps
from “Lighter” (1) to “Darker” (7).