Savin 1232 - Manual (Page 71)

Procedure for Sending E-mails
67
6
FFFF
Make the scan settings.
To make the scan settings, call up
stored settings or make the settings
individually.
Reference
⇒ p.21 “Setting Scanner Fea-
tures”
Calling up stored scan settings
A Press [Recall Program].
The User Program Recall screen
is displayed.
B Select a user program of scan
settings.
C Press [OK].
The selected user program set-
tings are applied.
Making the settings individually
A Press [Scan Settings].
The screen for making scan set-
tings is displayed.
B Select resolution, original size,
and other items to change the
corresponding setting.
Scan settings are made in the
s a m e w a y t h e y a r e p r o -
grammed. See p.21 “Setting
Scanner Features”.
C Press [OK].
The scan settings are applied.
GGGG
Select the file type if necessary.
A Press [File Type].
B Select the file type of the file to
be attached to the e-mail from
the displayed types.
The selected file type is dis-
played under [File Type].
HHHH
Select the destination.
Four methods are available for se-
lecting a destination: selecting it
from the list by specifying a short
ID number by directly typing the
e-mail address or by searching it.
Note
❒ Before selecting the destination,
make sure to select [To]. When
necessary, select [Cc] or [Bcc]
and the respective destinations.
It can not specify more than 100
destinations including [To], [Cc]
and [Bcc].